xoferz
xoferz
If you are using ZHA, you can modify the device type to a switch: https://www.home-assistant.io/integrations/zha/#modifying-the-device-type
+1 for OPNsense
Not only is my voltage off, but amps*volts do not make watts: Current 3.3 A Power 527 W Voltage 22.9 V 220V system, but neither 3.3A times 229V nor 3.3A...
Understandable. I mentioned it in #91, but it might have been overlooked. It is not strictly an issue as such, just that all the rest of motion sensors in my...
Same goes for `format: hm` While strictly not incorrect, 3:60 looks silly.
Happens here as well, couple of times a day. Solarman integration 25.06.07 I have seen it on production as well as grid power used.  log: `2025-06-27 11:37:40.881 DEBUG (MainThread)...
> Corruption of power sensors is hard to detect as these values could as well be valid for some devices... but detection of corrupted energy data is already in place....
> > Sorry if this is a different issue > > No really, but issue is originating in the device and integration only does some mitigation throughout value validation, but...
I can confirm that forwarding UDP 6667 makes the device discoverable by Localtuya in a different VLAN. I used UDP Broadcast Relay on Opnsense to forward the broadcasts. So it...