x893

Hello, i connect both OTG and UART cables, press both side buttons and RST. See USB Mass Storage device in Device Manager (Windows 10 22H2) with yellow mark and message...

Of course I try BOOT+RST and try download via UART. You can see error screen above (black text on red - BFLB SET CLOCK PLL)FAIL)

I try U-disk under linux and i see ` [ 100.203204] usb 1-1.3: new high-speed USB device number 3 using xhci_hcd [ 100.333861] usb 1-1.3: New USB device found, idVendor=ffff,...

I reveiew and think that problem in ` static bool usbd_get_descriptor(uint16_t type_index, uint8_t **data, uint32_t *len) ... USB_LOG_ERR("descriptor not found!\r\n", type, index); ... ` under Win10 22H2 (or may be...

No fix yet ?

> If flashed fail, just try again. This means your bootrom is not ok, please boot+rst again.  Message SET CLOCK PLL FAIL

> I know, only try again. Or your uart port is poor then uart data is incorrect. I use M1s Dock with integrated USB-UART

Any news about kernel sources ?

Hi, thanks. I check later. Now build under Keil ARMCC.

Build successfully under linux Thanks