Jarrod

Yeah I was afraid it may not be a quick fix...but making it an option could be nice! Perhaps others will have different ideas.

Hi Luke, Yes - the gain settings in GQRX work correctly. Thanks! Jarrod On Wed, Jan 8, 2020 at 7:06 AM Luke Berndt wrote: > I will look through it...

Weird. Using the regular "gain" is the only way to get it to work. I assume it makes the other 3 settings the same value. Luckily setting just a standard...

No improvement for me...did a 'git pull' and used the following for the config. Had to add "gain" back in to decode (with a value of '8'). { "sources": [{...

I agree I wasn't using error correctly...I changed it to to PPM but this doesn't seem to fix the issue with the gain settings. I still have to use regular...

Do you have your json formatting correct? Here is my airspy config that works fine (on Linux and Mac M1):

That rate is not valid for Airspy. If it's an Airspy R2, your two choices are 2500000 or 10000000 (2.5 MHz or 10 MHz). I don't know if that will...