wusnga8dn
wusnga8dn
> 你好！ > > 是的，我们已经使用 Raspberry Pi OS（以前称为 Raspbian）完成了类似的配置。如果您使用的是自定义 Linux 映像，则所需的步骤应该与演示中的步骤非常相似。该过程涉及提供来宾操作系统所需的必要配置。 > > 例如，如果您需要在来宾操作系统上使用以太网端口，则需要在其配置中授予来宾访问以太网设备的权限。同样，如果您计划将显示器连接到开发板上，则需要授予来宾访问 HDMI 设备的权限。 > > 正如您在我们的演示中所见，必须对两种操作系统（Linux 和 freeRTOS）采取类似的方法。例如，请参考[此处提供的 Raspberry Pi 4B 的 Linux+freeRTOS 配置](https://github.com/bao-project/bao-demos/blob/master/demos/linux%2Bfreertos/configs/rpi4.c) I'm very sorry...
> The configuration is straightforward, and we highly recommend that you take a look at the configuration example provided in the Bao repository at https://github.com/bao-project/bao-hypervisor/blob/main/configs/example/config.c This should give you the...
> 2\. freeRTOS Thank you very much for your help, but I don't understand a little about the steps you mentioned. Here are my questions: 1. How should I make...
> Btw, if you are using minicom, I've experienced not being able to input any characters. To fix this issue make sure you disable `Hardware and Software Flow Control` in...
This is all the information printed by my serial port, the cursor no longer prints the information 
Hi Jose Martins, when I connect the ethernet cable directly from your computer to For the Raspberry Pi, statically configure the IP for the wired connection: 192.168.42.2. The specific configuration...