wsandor

Hi, Thanks for dealing with this issue! For example, if I put these lines to the beginning of your dmd_rgb.ino demo (from the examples\STM32F4_RP2040\dmd_rgb folder) ``` #include // Must always...

> I can create a new template for panels with registers and insert the initialisation into the chip_init() method, which was once created for this. I would appreceiate if you...

Thank you! Some minor changes was also necessary in DMD_RGB.h and DMD_RGB.cpp as the chip_init() was in the STM32 conditional part, but now it is working as expected. Here is...

I hope so. To tell the truth these artifacts are only rarely visible - if some garbage data shifted out to the modules (during program downloading or because of a...

Just some feedback: I haven't experienced the artifacts prior to the chip init, so it seems that it works properly. Other topic: I extended the library with the handling of...

Hi! I haven't tried the HUB08 RG /RGB part yet, but from the description it seems to me that it can only outputs to 2 card rows. (maybe I am...

Here is my connector pinout:  Depending on program compile, I can use 1 RGB or 4 RG outputs

If you mean the connector on the LED cards, then they are "normal" 2x8 pin headers with HUB12 pinout. (But as your monochrome library can drive 8 from it parallel,...

> But your coordinate transformations for matrices with complex patterns seem too complicated to me. In my opinion, they can be written shorter. You probably right, but for me, it...

Unfortunately, I don't have a whole simple sample to show, but try to show the relevant parts. The main purpose behind it was to be able to make a moving...