wisemonkey

@fluks I wouldn't mind using this approach. Do you know how to find Class and Extras for other VPN apps? Also my scenario is: as soon as I get disconnected...

I wish I can, I'm gonna look at https://github.com/tuckerbuchy/ledvis/tree/hsv and see if it can be ported to ambi-tv with proper changes. I'll update if I get anything done :)

Ok Let me ask this differently: Is there upper limit on number of LEDs this setup supports smoothly?

I use separate power for LEDs and for Pi. I've 5V 10A supply for LEDs (cause its around 4 meters) And USB 2A rated supply for Pi. Do u suggest...

Thanks I'll try higher amp rating adapter. I've only video grabber on USB (so it shouldn't be an issue event then I would appreciate if you can share a link...

Hey btw just looked at raspi-config again and Turbo says "6 overvolt" do I need 6V supply instead of 5V ?

Corrupted my SD card :( I need to be careful while playing with overclocking settings -- I was trying to change these settings manually

I already have USB male-female cable. So according to your suggestion, I'll cut the USB cable and connect power and ground directly from power source while only data lines are...

Done -- connected grabber power source from separate Power and Gnd as well connected them to the Pi side as per suggestion. What do you guys use for xbmc? I'm...

oh well I don't see /dev/video0 anymore after "modprobe usbtv" :( what can be the issue? --- There is an issue with USB extension cable / the way I'm powering...