Tisham Dhar

I have been using mpy-sync with WSL successfully in most cases. Exceptions are binary files associated with btree and images. It would be nice if mpy-sync transferred binaries nicely.

Please supply the full schematic or compare it to the [ATM90E26 Featherwing](https://github.com/whatnick/ATM90E26_Featherwing_KiCAD) for reference. It may also be a good idea to buy/make the featherwing design yourself for a complete...

Hi thanks for the additional info. The issue seems to be unpopulated R1/R2 resistors in the PCB , which means no voltage is getting to the energy monitor except whatever...

Since some voltage is being sampled it is time to perform calibrations. Please see docs here : https://github.com/whatnick/ATM90E26_Arduino/tree/master/docs . TL;DR your options are to change your voltage divider ladder resistors...

Did you read all of the docs and update the CRC values ? What do the status registers say. Please lodge some consulting time with me. Unfortunately this is the...

In firmware interaction of the various parts is crucial. I haven't checked the code in your fork, but do you have the SPI/ UART jumpers set correctly ? Can your...

Could I please see the jumper settings underneath.

Please set jumpers for SPI or UART mode as appropriate. No jumpers have been set. Here please check the PCB or code repo for the jumper options. On Fri, Nov...

Your issue does not mention which ESP32 pins you used and what code you ran exactly. Moving from one controller to another and hoping it will work is rarely a...

Please fork my repository and push code to it for easier review. ESP32 UART mode is tested to work. On Wed., 3 Oct. 2018, 04:34 Joaovma, wrote: > Hello Whatnick,...