ATM90E36_Arduino
ATM90E36_Arduino copied to clipboard
whatnick
Arduino library for interfacing communicating with the ATM90E36 poly-phase metering AFE
I'm using a CT 100A/50ma, but in the real world with my tests it doesn't exceed 65.5A. Would you be able to help me?
When calculation the HIGH WORD of the Checksums 0 - 3 only the last 7 digits are considered. It should be the last 8 digits! E.g. in Sheet "Measurement Calibration"...
Hi, I am trying to use YHDC SCT 013-100 CTs with ATM90E36 but having no succes caliberating it. The output is 50mA with turn ratio 2000:1. Previously I have used...
Hello, In SPI/ Normal mode (DMA -> Low / PM0,PM1 -> High), I am getting all 1's from all the registers. I tried it with a couple of different ATM90E36A...
Hello Sir I am currently working on a project of computing energy in a 3 phase system. For this, I am using ATM90E36 IC along with ESP32. Your .ino code...
no matching function for call to 'ATM90E36::ATM90E36(int)'
Hii Dhar, I am working on interfacing of ATM90E36 with ESP32. As per the your library, interfacing was successfully carried out. However, while reading the data (only three phase voltage...
All power values that are negative were showing the full range "-32.76" which is not correct. After reading the datasheet it lists that the register data format is "Complement, MSB...
- Registers are now correctly written - All registers are now configured with their default values
