wharfbanger

Thanks Alexey. Can you please provide code with actual array1 and array2? Even better would be to provide an updated Colab notebook..

Thanks Alexey, I modified using the Xarray function (as suggested by ChatGPT) and the notebook successfully executed that step (SBAS Trend Correction), and the remaining SBAS steps. GREAT. Unfortunately there...

My notebook completed, but there was no correlation between PS and SBAS (SBAS vs PS Results Comparision). I exported SBAS (disp-sbas) and calculated rate (mm/year) by linear regression. Otmanbozdagh_mud gave...

It would be very useful to have a general purpose example that can be applied to a variety of areas, and where the parameters are well documented. StaMPS has been...

Thanks Alexey,Your explanations are useful and appreciated.  Imperial Valley:  Is it possible to reduce the grid spacing from 60 to 30 meters (or 15 meters)? If so, which parameters?  Please...

Thanks Alexey! To answer your question: why do I need to improve SBAS results? Here is my situation - I have a study: a two year time interval in a...

Thanks Alexey! *Please disregard last email that contained an error* To answer your question: why do I need to improve SBAS results? Here is my situation - I have a...

Perfect, I'll give it a try with your suggestions. I have attached the images FYI. Mark On Sun, May 12, 2024 at 11:11 PM Alexey Pechnikov ***@***.***> wrote: > Unfortunately,...

Thanks Alexey, I took your advice and tried changing the Imperial Valley to a 30m grid: decimator = sbas.decimator(30) This gives an error at the later step: tqdm_dask(unwrap_ll := sbas.ra2ll(unwrap.phase).persist(),...

Thanks Alexey, this solved my issue!Sent from my iPhoneOn 15/05/2024, at 12:34 AM, Alexey Pechnikov ***@***.***> wrote: For geocoding the results, you need to create the proper geocoding matrix like:...