Walter Brokowski

[curacustom cylinder fancy bottom.zip](https://github.com/prusa3d/PrusaSlicer/files/10210471/curacustom.cylinder.fancy.bottom.zip)

I changed the gcode res in prusa to .2 and it did not stop the pausing

oh, sorry the slicing needs to be changed.

ok changed slicing resolution to 0.01. Still pausing

yes , slicing resolution to 0.01 gcode resolution to 0.2

There is no power recovery on smoothie.ThanksOn Dec 14, 2022 6:10 PM, mperino ***@***.***> wrote: You may also want to try turning off "Power Loss Recovery" on the printer. There...

Hi, Sorry for the delay. Ok I tried with a coarse gcode resolution (0.1) and I got the same pausing. Please note I have tried 3 different smoothie FW. I...

I figured this problem out. In the firmware (smoothie) there is a setting called junction deviation. This was set to a value which was extreme (0.5) proper setting for my...

solved. thanks for your input