Waywit

Thanks for the workaround it is working fine... :-) But actually there will be no update check anymore... Hope you will find some time to setup a new release, as...

I have the same Issue on FritzBox 7590: `2020/05/11-20:05:02 [891732] Error output from fritzbox_traffic.py:` `2020/05/11-20:05:02 [891732] Couldn't retrieve fritzbox traffic` `2020/05/11-20:05:02 [891732] Service 'fritzbox_traffic.py' exited with status 1/0.` `2020/05/11-20:05:09 [891732]...

Thanks, I have tried your version and everything works fine now :-) Best regards!

I have exactly the same issue here, after a reboot the conee gateway is offline, clicking on "Pause" and "Play" it goes immediately online. But additionally all my sensors (Xiaomi...

Hi, clearing the openhanded cache has helped me and the issue is gone now. 1. Stop openhab 2. openhab-cli clean-cache 3. Start openhab

Where can I get it from without ssh, ftp and telnet..? I can access the Cameras only with webui... the only open port is 80. I am not sure if...

Just one additional information... after resetting the cam I put the "yi-hack-v5" folder back to sd card and restarted the camera. Config is rested and ssh enabled but port is...

:~$ nmap 192.168.1.241 Starting Nmap 7.80 ( https://nmap.org ) at 2024-03-23 12:59 CET Nmap scan report for xyz (192.168.1.241) Host is up (0.028s latency). Not shown: 999 closed ports PORT...

Hi, yes telnet and ftp are working without the sd card, but I am not sure which screenshots you need? Here are some examples from ftp:

Just tested a little bit around... and I can mount the sd card in my linux machine, so if you need some of the files I can get them from...