wastelandgunner

I don't believe it to be a user error. I am experience the same problems.

> I have heard people have uploaded the original FF Inventor firmware onto the Monoprice Inventor to be able to use the normal FF Slice instead of the MP one....

I did attempt that, but your tool did not recognize the printer. On Tue, Sep 14, 2021, 1:11 PM Moonglow ***@***.***> wrote: > You can try to install firmware via...

> @wastelandgunner Can you provide me original MP slicer software, i think it will gives me more answers... i can't find original software download links on over Internet =( ?...

Thank you so much for the update! I've gone ahead and purchased a ST Link V2. Should arrive in 2 days. I'll extract the firmware then and get back to...

> @wastelandgunner It would be nice, it gives me ability to flash this dump to my motherboard and write normal guide and make that process safety. Also it will be...

After using it for a bit, here's what I noticed: Working: - [x] TFT Display (new colors) - [x] Touch screen controller - [x] Bed and nozzle temperatures - [x]...

> @wastelandgunner > > New FF Flasher will allow update firmware from Bootloader/Application mode: [ff_flasher_2021_09_24.zip](https://github.com/moonglow/FlashForge_Marlin/files/7227700/ff_flasher_2021_09_24.zip) > > So, now you can choose firmware from Release page and install Marlin or...

> You need to write frimware via bootloader mode in this case. Start flasher and than just turn on your printer, it works for me with your bootloader and i'm...

Update: After modifying and using ff_flash_firmware.py with the Inventor's vendor ID and running it on Linux, I was able to get a couple different firmwares to successfully flash and run....