waseem-arshad94

Thank you for your reply . My problem statement is exactly the same . That it is possible to use loopback as mentioned by you (https://wiki.analog.com/resources/tools-software/linux-drivers/iio-transceiver/ad9361#bist_loopback) while using spectrum analyser...

Thanks for your valuable response! Actually I want to sweep the RX LO from 70 MHz to 6 GHz in loopback, and want to see the result on spectrum analyzer....

  Now I injected RF 507 MHz that is captured by spectrum analyzer iio oscilloscope but at there is no output on the external spectrum analyzer connected to TX1...

TX LO is 2400MHz by default I understand that loop back will work for 1x RX LO & TX LO ( with RF bandwidth 56 MHz ) but is it...

The peak is captured when I clicked start sweep button on iio oscilloscope

But in loopback it works for iio-oscilloscope for entire range 70 MHz to 6 GHz. But its not displaying on spectrum analyzer how its different from iio-oscilloscope. Any setting I...

Thank you Sir @tfcollins and Sir @mhennerich . My objective is that combine spectrum analyzer fuction ( peak search , peak detector ) and DDS/DAC . I think I have...

@proto17 Dear Sir; I am getting this error when I started with DJI Phantom 4 Pro V.2 CRC Check failed. Following are my outputs.  ![Screenshot from...

Basically When I generate my own boot files from openwifi-hw, and pasted into BOOT directory, board is **not pinging with my PC**. I just added the ILA to debug the...