wangsamas-firmware

wangsamas-firmware copied to clipboard

Motors not moving to Gcode

32

Hi, really glad there are people like yourself helping those who can't program still have access to SCARA firmware! I have recently built my own single arm but have been...

Power3DPrinting

Hi everybody! When i try to verify the code it takes me error When he trying to linking everything together... It se d me an error "undefined reference to setup"...

biri3d

Hello! First of all I want to thank you for sharing the firmware you developed. I'm building a robot scara for a learning project. The mechanical part is not yet...

ricardocjcosta

Kossel problem with steps per unit

4

HELLO . I want to congratulate for the software. I got to upload the software afther changing the parameters in configuration.h . The only problem is that i change the...

gabriel13luca

I need some help.

4

Hey there. I opened this issue to get some help from the program developer. To make a large SCARA 3d printer, I used your firmware. this firmware is good to...

tankdoc

Hi, I made a scara single arm using your firmware. After that, I did the calibration, and the elbow thinks that the numerical value is determined correctly. The problem is...

dlgustjr0911

Hi,Do you have plans to port to high-performance ARM? E.g. STM32

natdon

What happens when you don't have the right drivers?

4

Hi, starting from the ground up in reconfiguring the Wangsama firmware for a single arm SCARA, using a RAMPS Arduino setup and I am not very tech savy, I can...

Power3DPrinting

Include the RAMPS4DUE board

1

Hi, Is it possible to include the RAMPS4DUE board? The scale requires many calculations. Thank you.

altnelu

advantage

3

what is the advantages/improvements over the other firmwares?

ekaggrat