ray wan

I changed the CMakelist in src and compiled again but met another issue: Finished

> I don't have windows to test, but did you try installing python 3.10? Otherwise which version of python are you using? I‘m using python3.83 which the humble documentation recommended....

> Can you check the error message you are getting in the log file of the failing package (control_manager)? It could be a missing python module. I found this in...

> That probably means that the `ros2_control` package has problems on Windows. It doesn't seem to be related with Webots. ok, I will back to foxy.

> That probably means that the `ros2_control` package has problems on Windows. It doesn't seem to be related with Webots. I've tried foxy with webots on windows and got some...

> @wangruoyao, I got the same error with my Humble install, so I was going to try Foxy too. Did you get it to work with Foxy despite those errors?...

> I built it with Foxy and the only outputs to stderr were warnings, not those missing DLLs. Then I was able to control the robot with ROS topics. could...

但是你们现在的最新版我的系统用不了啊，要求10.11以上

不知道是不是1.5，从github下的zip，显示不能用。

就是1.5......系统要求10.11，我是10.9.5.....