wa2mze

This is being added to the adafruit si5351 library https://github.com/adafruit/Adafruit_Si5351_Library/pull/16 There have been a few reported problems of Si5351 generating frequency outputs way to low or to high in frequency....

Open Book vs Open Book Feather wing

29

I just ordered two displays ("First rule of government spending, why buy one when you can have two at twice the price?"), couldn't justify spending as much on the shipping...

I'd think that adding a wire from the GND power return of the 4 CAN cable wires to the USB gnd at the CAN side would provide some safety since...

Allow for clock 1 and clock 2 to both run, but at the same frequency and different phase settings

6

It should be possible to run both clock 1 and clock 2 at the same time if they are set to the same frequency. Why do this? So they can...

I had started to build your original version, and now I see it's not going anywhere! I might want to start over with your new version, at least I already...

using a different display?

22

I found this display, https://www.aliexpress.us/item/3256806709509463.html?ug_edm_item_id=3256806709509463&pdp_npi=4%40dis%21USD%21%246.03%21%243.50%21%21%21%21%21%4021017dd017241432938424107d1f3d%2112000038645521034%21edm%21%21%21&edm_click_module=item_detail&tracelog=rowan&rowan_id1=aeug_edm_56672_1_en_US_2024-08-20&rowan_msg_id=0220biz_search_product%3A0%3A0_575977151%240f0a6fe49d074b1588cfa4e1b5b33538&ck=in_edm_other&gatewayAdapt=glo2usa which is larger than the one you are using. However, it uses a different controller chip. I wonder how difficult it would be to change...