vyruz1986

I found this issue while searching what happened to the SAC2016 and LTSC2016 images. I've read @dtretyakov's comment but the MS doc link provided in that comment seems to contradict...

It's PR #224 , tagging for clarity. In a previous PR I created, I had to tag @deiger to get this PR merged, I assume they're as busy as the...

I've been looking into this. Just leaving some notes here in case it might help someone:. The local IP is determined in this method: https://github.com/deiger/AirCon/blob/a30f6092268119079aa9bda2dc984db8c75c6f29/aircon/notifier.py#L48-L57 I tried copying that method...

I've made a PR with a workaround (the ability to specify the IP address in configuration) to this issue, tested it on my setup and it fixed the communication with...

> Hi @vyruz1986 , > > I get your point but in my setup, my HA hasn't an IP in each VLAN... (and honestly I don't understand why) > >...

@kevtuning So this repository provides an 'add on' for HA, it sets up communication with the aircon units, then publishes correponding messages on the MQTT broker, which then get picked...

@kevtuning What do you mean by 'MQTT Bridge'? If you want to run this software standalone from HA in your IOT VLAN, you would not even need the PR I...

I see. I don't think that's necessary since there's no requirement for the MQTT broken to be available on the IOT VLAN, only the application from this repository needs to...

@deiger Any chance you could take a look at this PR and either merge it or provide feedback? We have #240 open since july and it looks like the solution...

I forgot to mention I was (beside this and [this](https://github.com/netdata-be/PalletHeater-REST-API/issues/1) repository) also looking into [this](https://github.com/edenhaus/esphome-extraflame) solution, which I found the most attractive since it uses ESPHome allowing me to easily...