vshijiav

```yaml substitutions: # Settings - Editable values device_name: "nspanel" friendly_name: "test" wifi_ssid: !secret wifi_ssid wifi_password: !secret wifi_password # nextion_update_url: "http://HAip:8123/local/nspanel_eu.tft" # Optional # Add-on configuration (if needed) # heater_relay: "1"...

I kind of figure it out, I created a guest network called test with a simple password and it instantly connect, I tried flash the welcome firmware on web esphome...

The strange thing is that as long as I connect to the SSID 'test' once, it starts to recognize my old 2.4G SSID. I flashed back old SSID version and...

 After working for some days sadly it stops working, stuck at connect to WIFI...Is there any troubleshooting method to see what is happening with this? I can confirm none...

> Can you connect to your panel to get ESPHome logs? If so, please share some here. The problem is, the panel actually never connects to ESPhome (Esphome shows offline...

Or is there a way I can set up a hotspot for the panel that I can connect WIFI myself during setup?

> You can add `captive_portal:` to your panel's yaml, but you will have to connect to your panel to install this anyways. 😞 I think I found something, last time...

> If ESPHome can't connect to WiFi, it shook ukd expose an wifi fallback AP with your panel's name, but if it is connecting, you shoukd be able to see...

Yes I used ping instead of mdns, but still offline Right now the panel refuse to connect to WIFI and behaving just like the picture shown above. All the successful...

> So, the panel is not connecting to Home Assistant then? > > Ok. > > So, I can only suggest you to flash via serial in this case. 😞...