Tyler Erickson

Hi @Martegnan, The command returned a successful response (hence running it on two disks before checking the result). The `seagateQuickFormat` should only be used if there was a failure from...

Hi @Martegnan, Thanks for the additional information. I'm reaching out to some people internally that may be better able to help me debug this since I am not sure why...

Hi @Martegnan, Thank you for the update! I'm glad you were able to change the sector size on your other drives without an issue. That is very useful information. I...

I think out of band management system may be a good generic term. I do not know of a better one, but have heard of this plenty of times and...

Can you share the output of the following options? `SeaChest_Format_x64_windows_R.exe -d yourDevice -i --showSupportedFormats` Also, can you share the output from this with `-v 4` added to the end? `SeaChest_Format_x64_windows_R.exe...

@JSinghDev, Thanks for all the output. This scenario is definitely odd. I don't see anything in the output that you provided that seem suspect to cause this. Once the drive...

Thanks for the extra detail @JSinghDev! When you interrupted the format the first time, this puts the drive into "Format Corrupt" state. In this mode a lot of commands that...

I reread this thread and I think the reason format unit was not showing in the features is due to the drive being format corrupt (interrupting fast format mode 0)....

Hi @NavCC, Thanks for the report...those numbers do look very wrong for bytes read/written, and power on time. A quick review of the verbose information looks like the identify commands...

Hi @NavCC, Thanks for the other information! @vibhutipratapsingh has been chatting with me as he has tested and reviewed the openSeaChest code, and it looks like the reported values are...