Tyler Erickson

Hi @yaarith, We do not currently have RPMs being created for the project. We will look into adding these.

Hi @CraigLoomis, Thanks for the report. Can you share the verbose output of the whole process? Part of the set sector configuration command is to set a unique identifier from...

Thanks for the file. I do not see anything setup wrong in the commands, so I do not know why the command returned an abort status. This seems similar to...

@CraigLoomis, Thanks for trying that. Let me check with someone internally to figure out what is going on since nothing looks suspicious in the output. You may want to search...

I asked our spec representative and those bits are not needed on current products and were only needed for PATA/IDE. He also confirmed that SATA devices will ignore them without...

> Given what you have seen, do you think it would be worth trying from a different machine? Still Linux so this same program, but direct SATA. [This is at...

Hi @CraigLoomis, What sector size shows up with `-i`? When I reviewed the output in the `showSupportedFormats` file, the identify raw data seems to indicate it is running at 4k,...

What shows up with `-i --SATInfo`? In this mode it will show 2 reports. The first is the SCSI translated info (which may have cached the original sector size) and...

Excellent news! Yeah, it is a bit more complicated than most people realize. For anything outside of a AHCI card, like the 3008 or a USB adapter, the host operating...

Thanks for all the information to help debug this! I found the Seagate engineer that works with SuperMicro and asked for his help to try to figure this out. He...