vitotai
vitotai
First of all, we don't have an interrupt when the pressure is higher or lower than setting. (ADS1115 seems to have such feature, though. However, one additional PIN is necessary...
You might want to check PressureMonitor.cpp, looking for loop(). Good luck.
Do you notice that I don't make latest framework default for BrewPiLess? After migration to latest version, I setup a test platform of BPL which ran the latest framework and...
You are right. That should has nothing to do with TCP/IP or networking. However, I don't remember I had touched anything around that part of code. According to my debugging...
If you check my code, you might find that I prefer using static global variables or local variables which are allotted in the stack. I try not using dynamic allocation...
OK. So I had this issue, too. However, on BrewPiLess. The temperature reading jumped to 100+ Celsius and then slowly went down because of the filters. It went up again,...
It's just struck me that if buzzer is moved to GPIO2, GPIO18 can be freed as general IO for more actuators or sensor.
I've never used FAN. Frankly speaking, I've never noticed that there is an option for FAN. According to the source code, fan is turned on whenever heating OR cooling is...
I don't know. I've tried latest version, and it can be saved and restored successfully.
Nothing has been done for this issue. This issue seems like something goes wrong during loading of hardware configuration of the fan. However, mine works so it's difficult to resolve...