visualapproach
visualapproach
I'm not qualified to respond to that, other than it suppresses all noise* and the sound quality (including bass) is way better than radio. But wth, try to do it...
Cool! It will make building it much easier!
If you make a couple of screwholes I can post an STL-file for a case to 3D-print. Would be a nice combo ;-) And I'm interested in a PCB.
@archi It might be a tight squeeze to fit screwheads. At least in the lower left hole. Maybe I'll do a pin there. Fusion360 was down now and I'm out...
Excellent. I've made a simple clicksnap box design but I wait for PCB before printing or uploading it.
I got the PCB in the mail today. Thanks archi. Looks nice. I'll finish a box for it soon.
Opened a new issue with a 3d printable case design.
@archi I can confirm that the PCB is working. However the BT module didn't fit. Perhaps you have another version. I am updating the firmware to reflect the new pin...
Ok, I soldered pins on one side and jumper cables on the other, just wanted you to know, if you hadn’t tried yet. I see you have a socker on...
Instead of voltage dropping LEDs, you could just use a voltage divider with two resistors.