cc2531-killerbee-fw

cc2531-killerbee-fw copied to clipboard

Packet Injection Tools Not Working

1

I have been trying to use your FW image, with your branch of Killerbee, but have been running into some issues while trying to run the active tests. ZBReplay and...

srmescher01

USB Overflow in fw2.1r1

2

I am in a Zigbee dense area (~180 devices). I am getting USB overflows when bursts of packets come in. Ubuntu 20.04 Python 3.8.10 Acxico USB CC2531 Sniffer Board with...

MikeColeGuru

0 packet captured

12

Thanks for this project! I use a TI CC2531 to listen and decypher frames in ZigBee Pro and Green Power. However, since the last few weeks my dongle does not...

Mathil2Net

CC2531 fails USB enumeration

1

I did compile the latest cc2531-killerbee-fw ([356ae67](https://github.com/virtualabs/cc2531-killerbee-fw/commit/356ae67030b9eba4e07cb92442f2e74f46c9d9db)) and flashed it to a CC2531 using a CC Debugger. When connecting it to a Linux laptop I get ``` # dmesg [29197.436320]...

cygeus

Flashing

1

Tried flashing with hex files v2.1,rev1, v2.1 and v2.0 to my cc2531 using cc debugger. The driver after debugger notifies us that everything went ok, doesn't show up in device...

DuckSound0

Running the first command as per instructions gives error about repositories not found, specifically the error message indicates that the submodule at path 'contiki/platform/stm32nucleo-spirit1/stm32cube-lib' could not be cloned because the...

DuckSound0

Hello, I go into sdcc build following errors: ``` ./contiki/cpu/cc253x/dev/clock.c:64: error 98: conflict with previous declaration of 'clock_delay_usec' for attribute 'type' at ./contiki/core/./sys/clock.h:141 from type 'void function ( unsigned-int fixed)...

ThomasL01

Zbjammer on cc2531

1

Hello, I'm trying to use the zbjammer with the cc2531. I've flashed the cc2531 with the [Bumblebee version 2.1 revision 1](https://github.com/virtualabs/cc2531-killerbee-fw/releases/tag/release-2.1r1) and am using the develop branch of killerbee. When...

remydemy

usb.core.USBError Errno 75 Overflow

2

Occured when using zbwireshark to capture the zigbee unlock door packet command as below pyusb version 1.0.1 cc2531 firmware 2.1r1 Any help ,Suggestion ? Thank you. └─$ sudo zbwireshark -c...

Mizuki-ENG