Vinit Sutar

> Hi Mr.Stefan, I built tiscamera's cmake with -DTCAM_ARAVIS_USB_VISION=ON. But i still have only v4l2 in the device list of tcam-capture.

> Did you also use -DBUILD_ARAVIS=ON ? You may refer to https://www.theimagingsource.com/documentation/tiscamera/building.html for the cmake paramters. > > Stefan (its not "Mr", because "Stefan" is my surname :-) ) Hi,...

> What should I call you then? "Stefan" is just sufficioent. You are welcome! > > Which camera model do you use? USB3Vision is supported by USB3 cameras only. Not...

> The DFK 37BUX178 should be shown with tcam-ctrl -l twice. After you change the cmake parameters as mentioned above, building and installing tiscamera. > > Stefan Yes, now it...

> Hi Stefan, I did reboot my computer and i get the following output: `WARNING: erroneous pipeline: syntax error`

> Hi Stefan, After making changes, i get the following output: `Setting pipeline to PAUSED ...` `ERROR: Pipeline doesn't want to pause.` `Setting pipeline to NULL ...` `Freeing pipeline ...`...

> Can you tell what is your computer specs?

> Yes. It is an old Core i5 with Ubuntu 20.04. Does tcam-capture show your camera with Aravis now? Yes, it does show, but the video stream seems very slow....

> Hmm. Did you check the exposure time? It should not be too long. > > Stefan Hi Stefan, This is the current exposure setting. 

Hi Stefan, i reduced the exposure time, and the app stopped working. And it showed the not responding message, so i clicked on Force Quit. After re-opening the app, it...