William Breathitt Gray

The `setStreamSolo` method appears to be a no-op (or at the very least does not isolate the audio stream) on Android version 5.0.1 running on a Samsung Galaxy S4 as...

I encountered this issue today with the latest [LE11 nightly (f4f7d8e)](https://test.libreelec.tv/11.0/Allwinner/pine-h64-model-b/LibreELEC-H6.arm-11.0-nightly-20230115-f4f7d8e-pine-h64-model-b.img.gz). I ran it on a **Pine H64 Model B**, so it seems that this issue is affecting more hardware...

Why does this `amsdu_size=3` option seem to fix this issue? Is it because the device needs [monitor mode as described in the iwlwifi wiki](https://wireless.wiki.kernel.org/en/users/drivers/iwlwifi#about_the_monitorsniffer_mode)? Apparently this option will put pressure...

I tried the `amsdu_size=3` modprobe configuration on **LibreELEC nightly-20230327-9da7818**, but it did not resolve the issue for my Pine H64 Model B device. So it seems like that's unfortunately not...

Here's a brief update from my side: I tried [LibreELEC-H6.arm-11.0-nightly-20230328-a0f002b-pine-h64-model-b.img.gz](https://test.libreelec.tv/11.0/Allwinner/pine-h64-model-b/LibreELEC-H6.arm-11.0-nightly-20230328-a0f002b-pine-h64-model-b.img.gz) but I'm still experiencing the `invalid-key` error message consistently; my network is set for WPA2, frequency available at 2.4Ghz/5Ghz, and...

I cloned the image directly to the SD card so the files and directories are the exact same as distributed in the nightly image.

Sorry, I don't have an ethernet cable so I'm only able to troubleshoot directly on the device. :slightly_frowning_face:

I procured an Ethernet cable so I can SSH into the system now. There are no wifi directories/files under `/storage/.cache/connman` (as expected because this is a freshly formatted SD card)...

I'm curious if you are able to connect to your OpenWrt router when configured for an unencrypted connection. In issue #8731, I seem to have trouble with unencrypted signals too...

I'll be happy to run `iwd` in debug mode to generate the log output necessary. How do I do that in LibreELEC? I noticed when I log in via SSH,...