Viesturs Zariņš

Per-tool Z probe.

5

Hey, Klipper devs. This mod got a bit involved and maybe there is a chance to get this upstreamed. I have a Toolchanger setup where each toolhead has it's own...

fan: Support multiple printer fans

18

Allows to setup multiple printer fans. Multi extruder setups can have separate part cooling fan for each extruder. This integrates support for that in core klipper, removing the need for...

This should make the extruder to hotend path significantly smoother. Printing and testing now...

[Probe] Decouple Homing from probing Session.

4

The probe refactor is very helpful in making things more modular. However the Homing and Probing are stil tied together. This is a one-liner to make them independant. Allowing to...

Manual stepper support multiple motors on a single rail

1

Allows multiple motors to run in sync as a manual stepper. Tested with a tool dock lift.

When Background Processing is enabled, any ongoing manipulation, like move, rotate gets cancelled when the processing completes.

1

### Description of the bug When auto slicing is enabled, any ongoing manipulation, like move, rotate gets cancelled when the slicing completes. I expect editing can be done normally, regardless...

[Multi material] Support interfece material is used in the main support structure, causes tree support breakages

2

### Description of the bug Tree like supports are breaking apart when using a support material for support interface only. Support material adhesion is usually significantly lower than the main...