ivvi
ivvi
From the first picture you provided, the background picture is very obviously skewed; would like to confirm that you have done the following steps. 1. the camera calibration process is...
Based on your feedback, we have overridden your steps to. 1. walked through the camera calibration at the screen 2. luban wifi connection for camera capture 3. calibrated the photo...
> After restarting the laser and Luban I was able to finish the fresh calibration and cut another test square. The paper was never touched. > > Video: https://youtu.be/HZh7-5eV4EU Thank...
We have been able to reproduce your feedback problem, the reason is that the height of the executive head has become high, not the default photo height, from the video...
I hope you according to the following steps to go through, if the following steps to go through the failure to help you, please contact the aftermarket to change a...
Yes, the latest firmware version is Snapmaker2_V1.14.2_20220113 , so you can start from the second step .
You can obviously see that your first photo distance is correct, after cutting the distance of the photo again became far away, so it will lead to printing deviations; the...
This issue is difficult to reproduce, we need you to provide a more specific description of the steps or documents, so that we can reproduce the problem
Thank you for your feedback, this issue will be fixed in a later version
Thank you for your feedback, we have confirmed that the problem exists and will fix it in subsequent versions