Verbatim_T (Tim)

When running 4 Anchors and 1 Tag on Arduino Pro Minis (8Mhz / 3.3V), I've seen accuracy within 35 - 40cm when using the DW1000Ranging_ANCHOR / DW1000Ranging_TAG examples and commenting...

I also was getting unusual results when I was using an Arduino Mega 2560 running at 5V. I actually cover this briefy here along with some recommended logic level converters...

That's exactly correct.

In the bottom right corner of your console window, change "No line ending" to "Both NL & CR"

Not near my workbench at the moment so I can't generate the output from the sketch, but I'll see if I can get it uploaded later. Looks like the DW1000...

That would be more than enough current. Input voltage on the DW1000 ranges from 2.8V to 3.6V so anything in-between should be fair game.

@EarthBreaker apologies I didn't catch that earlier on your diagram earlier. Yes, you need to have a pulldown resistor coming off that pin and going to ground to prevent a...