vehystrix

[Bug]: Retractions are not counted in total filament used

1

### The problem The filament used counter is incorrect, because it only counts positive values for the extruder. So depending on the model and the retraction settings, the total count...

[BUG] FT_MOTION causes violent Y movement

5

### Did you test the latest `bugfix-2.1.x` code? Yes, and the problem still exists. ### Bug Description When I enable FT_MOTION travel moves on the Y axis end violently, causing...

### Description With `PARK_HEAD_ON_PAUSE` enabled (`M125`) the hotend will turn off after a while. This PR enables the same behavior for `M25` when `PARK_HEAD_ON_PAUSE` is disabled. It also will disable...