Cas
Cas
Just updated both SmartEVSE units to v.3.6.6
> 1. Yes, you would set the Solar settings (StartCurrent, ImportCurrent) on the Master and if enough power is available, it would be shared with the slave. However, current version...
> "If SmartEVSE1 toggles C2 to Off (SmartEVSE2 would be set to ) it would be possible to charge both cars at 16A without tripping the 16A breakers (assuming enough...
> From the manual page: > > "Note that it is important that you actually DO NOT switch the L1 pin of the CCS plug with the C2 contactor; some...
> Also I reserved the right to assume that C2 is always connected to L2 and L3, when doing calculations in Solar mode :-) Right, fair point. If and when...
That might actually be easier, cheers.
Testing now: ``` SmartEVSE1 { "version": "09:56:12 @Aug 1 2024", "serialnr": 6678, "mode": "SOLAR", "mode_id": 2, "car_connected": true, "wifi": { "status": "WL_CONNECTED", "ssid": "XXXXXXXXXX", "rssi": -62, "bssid": "XX:XX:XX:XX:XX:XX" }, "evse":...
I've been testing for the past weeks (without 2nd contactor) and as far as I can tell charging using priority by NodeNr works. I just installed the 2nd contactor (Solar...
> Test version: [f7c6869c.zip](https://github.com/user-attachments/files/16452143/f7c6869c.zip) > > Previous versions ( > Prioritization strategy can be set in the LCD menu: > > ``` > PRIORITY (only appears when PWR SHARE set...
> They are in the main branch, but not in any of the releases yet. Testing has yielded good results so far. Any ideas on when these changes can be...