vadimbz

It's been a while J In the meantime I found out that I can still do shell scripts with curl, proceeded that way, faced some sort of commotion with NPM...

Camera has to be rebooted after each parameter change, right?

If possible, I would like to keep monochrome night mode, and turn off just IR

I'm sorry, my knowledge of SSH is cursory, how exactly do I edit these? I'm getting the same output as you've shown, but I can't change values at any point.

``` [root@GK]# sqlite3 /mnt/mtd/db/ipcsys.db 'select * from t_sys_param where c_param_name="LED1Mode";' |LED1Mode|0 [root@GK]# sqlite3 /mnt/mtd/db/ipcsys.db 'select * from t_sys_param where c_param_name="LED2Mode";' |LED2Mode|0 ``` No dice, IR still on ``` [root@GK]# sqlite3...

``` [root@GK]# sqlite3 /mnt/mtd/db/ipcsys.db 'select * from t_sys_param where c_param_name="NoIRCUTStartTime";' |NoIRCUTStartTime|00:00:00 [root@GK]# sqlite3 /mnt/mtd/db/ipcsys.db 'select * from t_sys_param where c_param_name="NoIRCUTEndTime";' |NoIRCUTEndTime|00:01:00 [root@GK]# sqlite3 /mnt/mtd/db/ipcsys.db 'select * from t_sys_param where c_param_name="NoIRLEDStartTime";'...

Then it seems I'm out of options... other than wait for IRCUTMode to somehow kick in.

> Not sure what the settings mean. But with these settings the IR leds seem to turn off: Didn't work for me =(

I opened new device support request, and followed the template (data from the log). Also, it's marked as feature request/enhancement/help wanted. But sure, I'll create a matching forum thread.

[Feature Request on HA Forum](https://community.home-assistant.io/t/integrating-tuya-powered-sous-vide-machines-mzj-category-inkbird-isv-200w/357977)