uzlonewolf
uzlonewolf
It just ticked over, and it does appear to be a 30-minute update period. It also seems to reset every period as well; I have a pretty consistent 90w load...
It still needs to be verified, but at this point I feel the operation works like this: When the switch is Off, DPS 17 holds the last value. When first...
> Isn't it as simple as that? No, unfortunately it's not. If the switch is Off then DPS 17 will hold the last value even though no power is being...
> as see at 18:51 DPS17 from 100 to 71 while plug switched off (DPS1) That's because the 30-minute period started at 18:21, and it was turned on from 18:21...
> Is there a way to specify the IPs to scan? I have my IoT devices on a different vlan Check out my scanner rewrite at https://github.com/uzlonewolf/tinytuya/tree/scanner . With it,...
That's great! It looks similar to other RGB lights, it just uses base64 instead of a hex string. Decoding the base64 and converting to hex for those 3 values gives:...
Even if you do get the local key, a lot of devices such as the LSC-Bell 8S (#161) do not work in local-only mode without significant hacks. They really don't...
While it won't fix it, perhaps we should wrap that import in a try/except and print a message if it fails. That would at least allow local control to keep...
Hmm, that's an interesting idea, have something like the server listen for broadcasts and if it's been more than X seconds (or if it's in a list of "always poll"...
It doesn't have to be in the middle, as it's listening for network broadcasts it can be anywhere.