uskebasy

I have the same issue, how we can solve this?

> I think this is because my 24v 600w power supply is not powerful enough to charge the capacitors which have a huge initial amp draw. The problem is not...

Do you mean the total length of positive + negative cables or the length of the single cable?. So it is about 1.5 meters, I can try. The cable of...

Did you measure the current with a multimeter? How much current draws?

I have the original PSU that is 250W, it is another user that has the 600W PSU. Do you have problems also with the 360 watts PSU?

> When you turn on the printer, the supercapacitors are charged. After 3-5 seconds, the printer turns on. I think that this will not solve the problem. The problem is...

Thank you for this image, can you post the source? I want to further investigate to better understand. If this work, also a simple interrupter (manual) will do the work

Have you tried this solution? Does it work?

> We are talking about different things. We do not have high starting current. When the printer is turned on together with the UPS, on the contrary, current subsidence is...

> > I don't think you are right, we are talking exactly of high starting current. The supercapacitor at the start consumes a current that is higher than the maximum...