unknown1818

I got it working couple seconds ago with this default yaml https://github.com/syssi/esphome-pipsolar/blob/pip8048/esp32-example.yaml But: `pipsolar pv1_input_current 0.0 A pipsolar pv1_input_voltage 112.2 V` Why input current showing 0.0 A im currently using...

pipsolar ac_charging_status wyłączono pipsolar ac_output_active_power 0,0 W pipsolar ac_output_apparent_power 0,0 VA pipsolar ac_output_frequency 49,9 Hz pipsolar ac_output_voltage 234,9 V pipsolar add_sbu_priority_version wyłączono pipsolar battery_capacity_percent 0,0% pipsolar battery_charging_current 0,0 A pipsolar...

Its a hybrid inventer working without battery, do i need battery to show wattage from pv ?

My config fix: ``` sensor: - platform: template sensors: falownik_ac_in_moc: device_class: energy unit_of_measurement: W value_template: > {% if states('sensor.pipsolar_ac_output_active_power') | int

Im trying use: `external_components: - source: github://syssi/esphome-pipsolar@pip8048 refresh: 0s` But at compiling i got error: `INFO ESPHome 2024.3.0 INFO Reading configuration /config/test2.yaml... INFO Updating https://github.com/syssi/esphome-pipsolar.git@pip8048 WARNING GPIO2 is a strapping...

So even if the sector is wrong cryptsetup should decrypt and dmde should see raw signature files?

the password is wrong or sectors are "moved" because orico have different sector blocks? its better to investigate password or sector sizes? on that case i had two 2tb hdd...

you think it must be the same case or can i buy similar with same chip? or the "key" is in eeprom in that specific case? your program will try...

im 100% sure its the case because i remeber i was trying something to connect hdd to different case and was not working, how we can find keyblock or determine...

i think i need to find same case with same chip https://superuser.com/questions/1649962/hard-disk-drive-is-visible-via-usb-3-0-but-not-via-sata