Dave T.

Good work, I'm seeing the same in everything I tried just now. Looking higher up the supports, we also see brief moments of double walls during generally single-walled regions as...

Your model has spikes at the top, so there's no sensible way to print the last one-and-a-bit layers.    When you cut the spikes off, it slices ok....

@MxTale You're very welcome! I often have a look at models on github to see if there are any warnings ahead of crashing into an issue myself. I had a...

@Oscar-KK maybe you could edit the report include a 3mf file of it at the alignment that causes the long print time. I can rotate the one you included, or...

I'm a fellow user who would also enjoy having a removal tab on the purge line. But going by the information in this thread: https://github.com/prusa3d/PrusaSlicer/issues/3123 that's not the remit of...

@murk-sy Nice! That's going to extremely useful! I guess the plate wants to be intruding on the existing part so it doesn't modify the main dimensions? It's going to be...

and it'll be handy for other folk looking to report the same issue to find @murk-sy 's fix. I guess it's a grey area with workarounds - maybe there could...

Best I can fathom, that's there to play it safe for users who might have significant backlash in their printer. If your printer doesn't leave gaps due to backlash, you...

@S3D-r you didn't finish putting together the bug report: 

(just to be clear - I'm a fellow user just taking an interest in issues as they go by) Can confirm that the split action in your file results in...