tuxphone

Just to be sure your problem is really related to the interrupt handling and not sleep mode: Are you aware, that the lowPowerHandler() function will not permanently put the chip...

Can you rule out other sources of magnetic fields? How do you use the reed switch? "Open" and waiting for a passing magnet to close the contact? That would be...

You can't see it in the code, but it depends on the the radio.h (and radio.c) driver of the original cubecell board. The OnRxDone, OnTxDone and OnTxTimeOut functions are "callbacks"...

Hello, just to let you know: i did see your post. I do not have a quick fix for your problem. 1. I do have a T-Beam without OLED -...

Ok. Your personal network is non-meshtastic and non-encrypted? I don't see much problems. Put both nets on the same frequency/spreading factor/code rate - settings and your are good to go....

Hello, i'm not sure if it is the source of problems or unespected behavior, but meshtastic uses the GxEPD2154D67 while Lilygo themselves are using GxDEPG0150BN. https://github.com/meshtastic/firmware/blob/master/src/graphics/EInkDisplay2.cpp #if defined(TTGO_T_ECHO) #define TECHO_DISPLAY_MODEL...