tteckster
tteckster
I was seeing this issue as well. It seems that the upcoming 2021.9.0 release has _maybe_ solved it. After several reboots/restarts, this issue hasn't showed itself. EDIT: Well, dang-it happened...
Remove the entry (mac will be something like 000/000/000/000) in /config/.storage/wyzesense.json and /config/.storage/core.entity_registry It is caused by a defective sensor.
> Great, thanks! Is it likely a defective sensor, or just a poor pair? Because the sensor itself was working totally fine up until I upgraded the bridge. Would be...
I updated the bridge firmware from .30 to .33 fixed the problem for me.
> @tteck, upgraded by plugging back into a wyze cam? I switched to the 3.0 VirtualBox driver and haven't had issues yet (although it often takes between 1-5 days for...
Strange, you and I are both running Proxmox and mine is still going strong. Nearly 4 weeks. I guess that I just got lucky, and that never seems to happen....
I hope everyone will give us a recap of the status of their Wyze Sense integration since updating their firmware. For me, it's been running for over a month with...
> Mine survives anywhere from 30 minutes to a few hours before I need to restart but sometimes reinstall the service. I can always tell when it goes out because...
The script is nonfunctional and no longer maintained. It downloads the wrong image (haos_generic-aarch64-8.3.vmdk.zip), among other issues.
I'd suggest following this guide: https://community.home-assistant.io/t/installing-home-assistant-os-using-proxmox-7/201835