ttait-vantim

In your "setup()" routine you should use pinMode() to define your pin modes. If you put "pinMode(, INPUT_PULLUP)" there as the OP mentioned it will enable the internal pullup. Or...

The key matrix decoding library may already be enabling them for the relevant pins, I think that's what the "#define ENABLE_PULLUPS" is meant to do. Otherwise, in the setup() function...

I tried compiling JoystickTest for the SAMD21 based Adafruit ItsyBity M0 (IDE 1.8.12), but I get this error: Arduino\libraries\ArduinoJoystickLibrary-master\src/DynamicHID/DynamicHID.h:37:12: fatal error: PluggableUSB.h: No such file or directory 37 | #include...

No, but I didn't try too hard. I switched to a Itsy-Bitsy 32u4. Tim

You can use the ezButton library to easily detect a button change (with debounce - that's important!) and set a button event only on the button off-to-on transition, otherwise nothing....

Is this related to Issue #44 ?

Yes the windows calibration GUI on some axis appears busted. X,Y seems fine but throttle flickers wildly, even on my Thrustmaster. You can always print the ADC values from the...

See this issue for patch: https://github.com/bmaltais/kohya_ss/issues/1419#issuecomment-1694876051