Carlos G Mendioroz
Carlos G Mendioroz
Thank you!
I bumped in the same issue, seems a bug on the packet length that assumes version 3 ID (3.1, MQIsdp), which is longer than version 4 (3.1.1, MQTT). Solved by...
Something like this happens with Sim7000. powerOff "toggles" PWR_PIN instead of bringing it low, and it happens to work every other time (like powerOn/powerOff cycles brings the module down once...
The RS-232 interface uses DTR and RTS to provide for + and - source. If you ground RTS and feed +9 to DTR you can "directly" read the RX with...
I just run into this thread trying to compile darknet with opencv on Ubuntu 16.04. I have installed opencv 4, and I had used a pkgconfig file from opencv 2.x.x....
Thank you for your attention. No, I'm not using TinyGSM, just plain AT commands and the sessions I was referring to are not conceptually defined in those manuals. In fact,...
Deeja, I do have the code working, but I do not understand what are the dependencies involved, so then I do not understand what is needed to recover from some...
Well, the hardware guide lists PCM as supported (16 bit linear) for audio, so why do you say that AT commands don't work ? The AT guide says "ATD sets...
Well, all that I say is that the capability of making calls is in the SIM7000. It may be that the number you are calling does not accept "data" calls...
Radio link is between UE and eNB. The "local" RSSI from the UE point of view (the SIM7000) is the Received Signal Strength Indicator that relates to the DL (downwards...