translucentfocus

I made a pull-request based on your suggest https://github.com/reactide/reactide/pull/176

@galbenyosef I agree with @baylf2000 we are talking about two completely unrelated issues. @vdmokstati Sorry, but I'm not willing to do so given the current issues with the project

Following up as this has been stuck for ~6 months now with only 1 approver 😢 Would like to either close the request or get it completed 🙂

I made a pull request for this issue here: https://github.com/reactide/reactide/pull/176

> Yes, it's the same interface as #56. > > Can you please run `alienfx-cli probe=a` (answer "n" for light set) and share output to me? ``` PS C:\Program Files\AlienFX...

> It detects API v6! ``` PS ~\Downloads\alienfx-cli> .\alienfx-cli.exe probe=a alienfx-cli v7.1.0 Dell API not found, Low-level device 0 ready. ===== Device VID_187c, PID_100b ===== Version 512, block size 12...

> Ok, detection work correctly. Can you please use this test version - [alienfx-cli.zip](https://github.com/T-Troll/alienfx-tools/files/9466204/alienfx-cli.zip) Only second command (`set-one`). Did it change the lights? ``` PS ~\Downloads\alienfx-cli (1)> .\alienfx-cli.exe set-one=0,15,255,0,0 alienfx-cli...

> Ok, another version (same process) - [alienfx-cli.zip](https://github.com/T-Troll/alienfx-tools/files/9466309/alienfx-cli.zip) It worked! All LEDs were set to red. 🥳🎉 PCAP attached as .txt as usual ``` PS ~\Downloads\alienfx-tools-comment-1233653691> .\alienfx-cli.exe set-one=0,15,255,0,0 alienfx-cli v7.1.0...

Here's the dark, light, dim pcap as mentioned in the wiki. Change extension to .pcap [DarkLightDIM.txt](https://github.com/T-Troll/alienfx-tools/files/9466372/DarkLightDIM.txt)

> So.... New test version - [alienfx-cli.zip](https://github.com/T-Troll/alienfx-tools/files/9466631/alienfx-cli.zip) Can you please check different light/color set: > > * command is `alienfx-cli set-one=0,,,,`. ID = 1,2,3,4 - light number. Lights work! And...