Thomas Court

Can't edit a newly created category

1

- [x ] I am on the [latest](https://github.com/ActivityWatch/activitywatch/releases/latest) ActivityWatch version. - [ ] I have searched the issues of this repo and believe that this is not a duplicate. -...

Themes

1

Instead of just one look for the panel, may want to implement themes. A dark theme could be created easily enough by adjusting the styles. A larger text theme for...

Likely TCP timeout in pollForHttpRequest Add timing histogram code to track. Test with tablet being turned on and off. Determine if freezing is in connect, reading the http request or...

2 inputs with 1% 250 ohm either pull up (resistive sensor such as fuel tanks) or pull down (4-20mA sensor). Or open both for voltage in. 4 inputs with 1%...

6 cylinder support?

2

Should Enguino support 6 cylinders? I'm thinking if 6 cylinder support is added, the best way is to use a second shield, only partially populated. A custom shield with an...

Consider this part: TI's INA170 High Side Current Shunt Monitor

Dual input to handle hooking up to magneto p-leads where one lead may be grounded during run up testing. Dynon's can handle 12 volt directly. For a magneto p-lead they...

Support dual sensors for return flow? Red cube FT-60 draws 14ma at 8-30 volts. Output (white lead) is open collector, suggested pull up is 1mA, but no more than 15mA....

10µF should do. Spice seems to indicate RC works with limited input impedance.

Evaluate the need for thermocouple filtering on ADC input. Quite possible that much of the circuitry can be after the MUX meaning an eighth as many components: http://www.ti.com/lit/ug/slau509/slau509.pdf Also keep...