tmengicam
tmengicam
Any update? @henie did you try the EVK_iMX6ULL_512MB?
Hi, we have got custom board with the iMX6ULL and now we are able to boot the system. The board is very similar to the EVK_iMX6ULL_512MB so the standard u-boot...
Dear christoperco, I cannot get the display stable in the EFI environment, after entering in the UEFI menu the display disappear. We don't implement the LCD bring up in the...
Dear all, disabling the LCD I can start the windows boot but it stacked soon. I attached the log of windbg. The problem seems to be related with the boot...
I solved the problem selecting the right ALT function of the SDHC card detect MUX. Now the boot seems to go over and the debugger doesn't connect after the messages:...
Dear all, I'm still trying to use the ethernet. I fuse the mac address with u-boot and I initialize the device in the iMX6BoardInit.c. Ethernet LEDs are blinking but I...
I've booted into the default application and I've rebuild the driver with DBG_MESSAGE_PRINTING but I don't understand how to see debug messages. With the windbg I check the status of...
Thank you Marek!!! I start to debug the ENET interface. We have a LAN8710 PHY that is not in the devices list of imxnetmini so I added the device. Since...
We solved the problem with the ENET. Now we start again to debug the LCD interface, we will keep update. If someone has some suggestions we will appreciate.
Dear all, I am still working on this (annoying) problem with the LCD. I try to summarize the problem to see if someone could help us. We are able to...