Tom McAdam

I am hoping to try the ESP32 soon. I can see some people have tried different transceivers in this thread. It would be useful to know which is the recommended...

Thanks for your reply. I have a solar charge controller with data output. I'm using 127508 for the battery voltage and load, but I also want see the voltage the...

Hi Timo Thanks for your response, and sorry for the delay replying. I have an Epever/Epsolar charge controller. It has Modbus/RS485 port for reading data. I have used Victron charge...

I don't know if you can read history from the devices we were using, I think they were called Victron Bluesolar MPPT. It just outputs current values every second as...

This is very cool!! How would I send a mavlink command to change a tx or rx param?

I have tested with 2 x generic 900 rx and is working very nicely. Very cool!!!!  Only issue I can see is some inconsistent behavior around the led being...

> COOL! THX for testing! > > > Only issue I can see is some inconsistent behavior around the led being off or on when bound i.e. sometimes its off,...

> what do you mean with "bound" ??? it should be always bound to establish a connection in the first place also, led behavior should be independent on this mavlink...

> > If I switch on the tx and rx switched off, then it blinks slowly. I switch on the rx, the blinking stops and the led goes off. But...

> why does this want to go into main? is dev-esp-rx-td finsihed and sorted out already? Far from it, I opened the draft PR as a place to coordinate and...