tincanpete
tincanpete
I believe I'm having the same issue. The symptoms are the same, and I have also recently upgraded to 1.5.0 but have not been able to get it running in...
Thanks @Daveblanche for the tip, but yes I definitely did do that as recommended. I think the issue is on the OT Gateway end not the HA end though. I'm...
Thank you @Laxilef I will give it a try!
Hello, I have also just tested 1.5.1 and while I thought there was some initial success, its seems no. Having MQTT enabled definitely makes things significantly worse. I have attached...
@SanFable I will try that, I did not use the "factory" image, just the normal one and upgraded via the UI. I will report back my progress! Thanks
Still no joy unfortunately even after fully erasing and re-flashing the S2 and using the factory bin. I have attached a larger log but just look at this extract from...
To add to my previous comment, I did try disabling the "power" sensor which my boiler does not support, but it didn't seem to make any difference.
Interesting idea, I had considered it might be a wifi/router issue, however the network is stable and has been for a long time, running Home Assistant and many other ESP-based...
I've not had a chance to try with Wireless AP only as the hardware is running in a shop we own and I've not been there for a couple of...
No, "save debug data" just gives me this: ``` { "build": { "version": "1.5.1-testing", "date": "Dec 31 2024 02:02:27", "env": "s2_mini", "core": "3.1.0", "sdk": "v5.3.2-174-g083aad99cf-dirty" }, "heap": { "total": 188452,...