Tim Churches

Not sure how feasible this would be, but it would be great if CatBoost could also be made to work with the ViennaCL library that @cdeterman uses in his gpuR...

Plum Audio needs to provide some instances of its custom hardware to the authors of the firmware. Obviously it is impossible to develop and test firmware updates to accomodate such...

Max (mxmxmx) and I were investigating porting to Teensy 4.0 in 2019, I think - Max had a few pre-production T4.0s and I bought a few just after they were...

I haven't looked at the pull request code, but functionally, is this an improvement. By actioning the long-press when the button is released, the action can be triggered at a...

Please see the licensing informations at https://ornament-and-cri.me/licensing/ - if you are planning automated production, you need to discuss this with Max Stadler first, he holds the copyright to the hardware...

Have you read any Marx? Or any of Joseph Conrad's novels? Or Dickens? Or just about any European thinker from the 19th and early 20th Centuries? We are not defending...

Sure, I understand your position, and am not dismissing it. Max (aka mxmxmx), who suggested the name, and who is an historian of science and technology, would have something to...

The only solution is to use a pre-Catalina version of macOS with ArduinoIDE 1.8.1 as required by the o_C code. I have kept an old MacBook Air that can’t be...

@wraybowling you need to understand that maintaining o&C code so that it works with updated build chains etc takes considerable time and effort, for which there has to be some...

You can always run a linux VM under Catalina to host the older 32-bit Arduino toolchain required by o&c. That's a workable solution that involves a lot less effort by...