tikismoke

If so remember to publish on pipy to make everyone take advantage of your update.

Hi what's the status of the PR/ISSUE i'm issueing also this bug.

👍

Hi @john30 i try to upgrade latency with this command: ` ebusd -f --device=/dev/ttyUSB0 --loglevel=debug --enablehex --address=33 -c /home/pi/ebusd-TEM/ --scanconfig --lograwdata --latency=100000 --receivetimeout 10000` but still the same thing. I...

> did you adjiust the poti well enough? Pretty ~99% sure. I really got only AA and correct data but seems not fast enough

Ok i start again with the remote controller to try find the error. So when the remote display a value, like boiler pressure it works. I mean the value is...

``` Options to pass to ebusd (run "ebusd -?" for more info): EBUSD_OPTS="--scanconfig -d /dev/ttyUSB0 --loglevel=info --latency=10000 --enablehex --address 33 --receivetimeout 10000 -c /home/pi/ebusd-TEM/ --mqtthost=mosquito --mqttport=1883" ```

I think it looks like #515. Using the same esera device.

``` 2022-02-16 16:19:42.261 [bus notice]

I try to play with the potentiometer, nothing better. I always add the error on last symbol. I'm going to try the old v2.2 that was working in 2016 to...