Kolloom
Kolloom
I have built the firmware and tested it. don't see anything wrong.
the board does not reboot properly after flashing, reconnection is required. Not sure if this is normal
 the CW CCW is in wrong order i have to workaround like this 
(Firmware size check does not yet support STM32F103; skipping) this chip has 128 kB program memory and 20kB ram
also tested with a via keymap, same issue. the push button is in correct order. https://user-images.githubusercontent.com/31672176/196405419-800cd85a-556e-4245-8922-1fc3b0b29c27.mp4  ```json { "name": "KB16-01", "vendorId": "0xD010", "productId": "0x1601", "lighting": "none", "matrix": { "rows":...
https://user-images.githubusercontent.com/31672176/196407142-0b147c1a-f2a0-493a-b387-2b31d5a2c14d.mp4 the big knob is correct
Encoder is fixed.
the layout file on the wiki will only work with stock firmware, the binary i provided is for and only for use with vial https://get.vial.today/ you need to flash it...
@Bestmixtape you probably have rev1, the rev2 has an arm chip with 128kb flash. It should show up as a stm32duino 
flash it with stock firmware