thedeadliestcatch issues

Results 28 issues of


                                            thedeadliestcatch

TPA3116D2 + Arduino Nano with AD9833 issues

Hi, The pinouts for the Arduino Nano should be A0 for FSYNC and then the standard SPI pins (10.11.13) I'm testing mic-jammer-ad9833, intending to do some improvements, but with the...

Include paxtest in the image

Hi, It would be convenient to have paxtest included in the image: ``` FROM ${DOCKER_IMAGE:-archivebox/archivebox:master} RUN apt-get update && apt-get install -y \ paxctl && rm -rf /var/lib/apt/lists/* RUN paxctl...

ST7567S support (ex. gm12864 )

It would be fantastic to see support for these: https://www.dalbert.net/gm12864-59n-i2c-lcd-display/ Since the SSD1306 is already supported, it should not be a huge undertaking to translate the work for ST7567(S), AFAIK.

fs1000a testing (sensitivty issues)

Excellent component... I've been testing this with a fs1000a module wired to a coil loaded antenna (not superb tuned). The sensitivity is pretty terrible. Any suggestions appreciated if this is...

Apparent rate limiting on send (with attachments)

I've been observing the following behavior: ``` signal-cli-rest-api-1 | [GIN] 2024/06/27 - 20:04:53 | 201 | 10m2s | xxx | POST "/v2/send" signal-cli-rest-api-1 | [GIN] 2024/06/27 - 20:04:53 | 201...

Slow or rate limited send (10min delay on average)

### The problem I've been observing the following behavior with messages that contain one attachment (per message): ``` signal-cli-rest-api-1 | [GIN] 2024/06/27 - 20:04:53 | 201 | 10m2s | xxx...

Users that re-register account and rejoin groups do not get messages

### The problem In the event that a member of a group re-registers the account to a new number, signal-cli-rest-api seems to go out of sync and that person no...

Paranoid Pin Entry with scrambling will lockout the user

Helping someone out who enabled "Paranoid Pin Entry" and had PIN scrambling enabled too (for the BLE model). The result is that *nothing* is displayed when scrolling/clicking on the wheel,...

IF-SD-WIFI (ex. IPC_38x38-WIFI-if v1.02) support and reverse engineering

References: https://github.com/OpenIPC/firmware/issues/993#issuecomment-2059540801 (by @csvke) This is tracking the effort to support the IF-SD-WIFI board support. Currently it carries an Altobeam 60321s WiFi IC, communicating through the USB bus. Generic support...

Great example. Adding resolver/forwarding (proxy) support.

I have been reading ztunnel and some other projects using hickory under the hood. Do you know what is the simplest way to implement an authoritative (proxy) resolver? ex. hand...