thecoz420
thecoz420
I've tried waiting for up to 1 min but no luck. I think I'm going to need to get an ardurino nano and reflash/unbrick it
I used the stand alone bluejay-configurator 1.3.7, and I didn't save the log file unfortunately. It is a betafpvf411rx that looks like has the C2 pads, so I can hopefully...
I tried flashing an earlier version on BF, and then was able to flash the ESC back to JESC. If I want to try Bluejay, what is the best way...
Great, Thanks for all of you help. BTW my mothers made name is Rasmussen, so we might be cousins :-) Have a great day and stay safe,
I figured out that the problem happens when I enable bidirectional dshot. Then it shows 0 motors available in the motors tab, and no ESC's in the any ESC configurators....
I haven't used bidirectional dshot on this board, but I have been using JESC unlicensed. Maybe this betafpv board is incompatible
Betafpv board needs dshot_bitbang = off https://github.com/betaflight/unified-targets/pull/95
Im on 4.2.8 right now, but I had tried at 4.2.11, 4.3, 4.10 all with the same behaviour. Betafpv engineering is iffy at best. I'm confident that the problem is...