thallaa

I ran into this very same problem. I ended up removing all of the VENV-parts from the service.sh and then it runs fine. So my service.sh looks like this: ```...

I did more digging. The timings don't quite seem to match the quoted protocol but seems very similar. Comparing several pulses I first see a 2900us high, followed by 7200us...

Oh I did not mention all details of the device. The back of the remote says Cotech 36-6010/18-1255 Type: 50074 It has four channels, A-D. The switch says: Cotech 36-6010...

I re-read the wiki page on adding a new remote and I think I got a bit further. Looking at the raw numbers alone, there seemed to be quite many...

I tried modifying the library with this but the codes keep getting detected as protocol 3 and randomly protocol 5. Also, sending back the same codes does not work. This...

I've followed the instructions of adding a new remote here on the wiki: [https://github.com/sui77/rc-switch/wiki/Add_New_Remote_Part_1](url) As the wiki page instructs, I used SimpleRcScanner for obtaining the timings. I see the version...

I never continued with this (I have the other Nexa switch set working) but I see I should now that there is quite a bit more info available.